Friday, June 25, 2010

Kayak no 35

Then it was finally time for a first test paddle. Brilliant afternoon sun and plenty of time, it could not be better. Once I got down to the beach the wind blows a little bit, but not more than I dare to get out. I manage to fall off at the first attempt but no water had time to get in the kayak.






Here I have shot my self-designed footrest. These worked really well except that I overestimated my height. I will shorten the straps and move the base plate closer to the cockpit, otherwise there is no way to adjust.













This was all the water that came into the kayak. Most from my wet shorts, and from the paddle (Have not had time to sew a skirt yet)
No leaks in the hull!

Should add that it felt pretty unstable, I think that I´m too easy. May take more packing next time.
















After an hour I had tested clear. Why did chafing from the edges of the cockpit and over the edge.
So when I got home I took a piece of thick mats like matrial which I had lying and fastened with two thongs, see if it does the trick.

Tuesday, June 8, 2010

Kayak no 34


After two layers of the Colean coating it´s enough.
The last layer crackt on the aft deck.
But it is not really so important, most annoying.

Paddle no 8


The paddle is finnised with three layers Colean.
I´m very satesfied.

Sunday, May 30, 2010

Paddle no 7


The paddle was originally too large and unwieldy. I have now lighten it about 300 grams . The weight is now 1265 grams. Since this is my first paddle, It will do. Now I´m waiting for one or two layers Colean so it will not crack.

Friday, May 21, 2010

Spring is here!


Spring is here!

Yesterday I washed the kayak. It all started when I received an email from Daniele who wanted to know a bit about the nylon from FOV I used on the kayak. It made me wake up from winter doze. It's always hard to start after the winter, especially this very long winter. Many different bids when such vinter occurred last, but sure is that it not later than 1987 have been so much snow here.

Once again thanks to Daniele!

Sunday, July 12, 2009

Kayak no 33

Now the deck lines and toggles are in place.

In front of and behind the coaming I used 6 mm rubber cord.









In the bow and stern I used 6 mm deck rope.

Friday, July 10, 2009

Kayak no 32

The kayak do not leak!

Unfortunately it blew too much for a first test paddle. Becuse the only thing I had with me were a life jacket and a greenland paddle. What I'm waiting for some good weather combined with a free moment, so I can test paddle it for real.


Now there some job with the deck lines etcetera.










Thursday, July 9, 2009

Kayak no 31

Has begun the work on the deck toggles. These are manufactured of one piece Jarrah coming from my grandmother's old outdoor table. Jarrah is according to NE "wood is heavy, hard and strong and has excellent resistance to rot and insects."
This sounds promising for something that will constantly be flushed with water.





Ropes, I ordered from kajaksaker.se 10 meters each of rubber cord 6 mm and deck rope 6 mm.
Ordered at 5:00 pm on Tuesday and received the delivery at 1:00 pm on Thursday, That's very good delivery time I think! Must also add that the 10 meters was almost 11 meters.

Re-thanks to Kajaksaker.se!

Tuesday, July 7, 2009

Kayak no 30

The final coat of the kayak!
I did a third and hopefully last layer on the bottom this afternoon. Now I just waiting on a sunny day off for a first try on water.
The last layer of coat was the easiest to do and there was enough whit half jar ZAR polyurethane varnish. If you want the kayak in a solid color it´s required about 100 grams of artist oil paint / layer.


The picture is taken before coating!

Friday, June 26, 2009

Kayak no 29

After rain comes sunshine! So they say, and it is the truth because it has been raining! Somewhere they said it was the coldest and most rainy June in 50 years.
So now when the sun is shining, it was time to paint a little on the kayak. I have done the bottom once, and the deck two times. This time I used plenty of artist oil paint in the warnish.





But wow what difficult it is to get evenly without running warnish.

Are not visible in the pictures but I have had to scrape of a lot of warnish between the coats.

Sunday, May 31, 2009

Kayak no 28


I finally had time to give the kayak a first layer of coating.
My thoughts after the first layer:

It takes about 45 min / layer.
Mix CAREFULLY!
One jar / layer.
Don´t need to be diluted.
an extra jar to mix in is good.

Saturday, May 23, 2009

Kayak no 27


The kayak ready for the first coat whit Zar Polyurethane

Friday, May 22, 2009

Kayak no 26


I think the seam on the foredeck was very successful. It looks like I used to thin gunwales because they are not in a smooth curve.

Nobody has told me about how difficult, time consuming and torment of the hands it is to sew the skin on the kayak.














After having sewn the skin it´s time to attach the coaming. I began to tighten with a strap but I had no force to it. Then I continued with a powerstrap from the car, it worked very well. I also took the chance to try with two boards and clamp, it also works fine, but it was difficult to get room to sew.





The best seem.











Rear of the cockpit.











Front of he cockpit.












My wery first greenlandic kayak ready for the first coat.

Friday, May 15, 2009

Kayak no 25

To skin a kayak is not a game.
I read somewhere that you should tighten the canvas to the ache in your hands, I took the word for it.
Either I have weak hands or it is the sinew. I sit with four plasters and whimpers, I may take a few days pause to get my hands healed. The aft deck of the kayak is sewn together and cut so it is only a tab at 2.5 cm left.





This tool is lent to me by my father, super easy to cut the skin with.

Wednesday, May 13, 2009

Kayak no 24


Skinning the kayak continues. I got help with the stretching of the skin of my colleague Johan. We stretched the skin 15 cm without any problems. In retrospect, I would have opted for 20-25 cm, but 15 cm may be good enough. "






Picture of the stern.
Stitches are between 10 mm to 2.5 cm. It is difficult to know how long stitches that is best.








Picture of the seam on the aft deck.

Tuesday, May 12, 2009

Kayak no 23

Finaly time to start sewing the skin on the kayak.
6 m nyloncloth from FOV Fabrics, a needle and many meters senew. I begin by running stitches along the stem and also around the tip so it forms a small pocket.

Tomorrow is time to do the stern.





Monday, May 11, 2009

Kayak no 22


Has had time to do
some shopping, 3 bottles ZAR varnish from Blåhuset in Sollentuna (473 grams / pc odd amount) and 200 grams of artist oil paint titanium white from Hummelgårds färg in Arlandastad.

Saturday, May 9, 2009

Coaming no 5

Cockpit ring tested on the kayak!
I stained the bright cockpit ring with Herdins varnish stains, believe that the darker tone will do well against a white canvas on the kayak. I will drill 170 holes in two rows, the top row of the edge and the bottom for sewing it to the canvas.
Since I don´t own a drilling machine, I contacted the nearest school where the nice janitor Stefan promised to let me in to the crafts room when I needed it, fantastic!

Tuesday, May 5, 2009

Coaming no 4


The cockpit coaming did´t brake! (almost).

A small crack was there, nothing serious and it is partially concealed under the coaming flange. I glued on two thin flange of 5 mm to get the total thickness of 10 mm. I will sand the entire cockpit and after that "sew it in place". Finally, the cockpit will be treated but this I will come back to later.

Thursday, April 30, 2009

Coaming no 3


How difficult will it be?

Trials 1 and 2.

I think I will get the world's first kayak, whitout the cockpit.






Try 3.


I tryed with 7 mm thick and 40 mm high pine, the cracks a bit but as it is only in the outer annual ring.








Try 4.


Tried also with two 3-5 mm thick and 40 mm high. will see after the weekend if it has ruptured.